[. . . ] Projector ED-X26 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 49). "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "INVALID SCAN FREQ. " "Searching. . . . " while searching for the input "Detecting. . . . " while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. · When the OFF is selected, please remember if the picture is frozen. Do not mistake freezing for a malfunction ( 21). MyScreen Lock MESSAGE (continued on next page) 39 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the / buttons on the SCREEN menu to select SOURCE NAME and press the or ENTER button. (2) Use the / buttons on the SOURCE NAME menu to select the port to be named and press the button. (3) Select an icon you'd like to assign to the port in the SOURCE NAME dialog. The name assigned to the port will also be automatically switched according to your icon selection. (4) Select a number you'd like to assign for the port along with the icon. You can select the number either from blank (no number assigned), 1, 2, 3, or 4. (5) If you'd like to modify the name assigned to the port, select CUSTOM NAME and press the button. Use the /// buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the and INPUT button at the same time. Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button, 1 character or all characters will be erased. (7) To change an already inserted character, press the button to move the cursor to the first line, and use the / buttons to move the cursor on the character to be changed. (8) To finish entering text, move the cursor to the OK on screen and press the , ENTER or INPUT button. To revert to the previous name without saving changes, move the cursor to the CANCEL on screen and press the , ENTER or INPUT button. SOURCE NAME (continued on next page) 40 SCREEN menu Item Description Using the / buttons switches the mode for the template screen. Press the button to display the selected template, and press the button to close the displayed screen. The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed ( 45). TEST PATTERN DOT-LINE1 DOT-LINE2 DOT-LINE3 MAP2 MAP1 CIRCLE2 CIRCLE1 DOT-LINE4 TEMPLATE You can turn a map upside down and scroll it horizontally when MAP1 or MAP2 is selected. To invert or scroll the map, display the guidance by pressing the RESET button on the remote control three seconds or more when MAP1 or MAP2 appears. 41 SCREEN menu Item Description The C. C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. [. . . ] · E' vietata la riproduzione, la trasmissione o l'utilizzo del presente documento o del suo contenuto senza espressa autorizzazione scritta. MERK · Informasjonen i denne håndboken kan endres uten varsel. · Produsenten påtar seg intet ansvar for eventuelle feil som fremkommer i denne håndboken. · Reproduksjon, overføring eller bruk av dette dokumentet eller deler av det, er ikke tillatt uten uttrykt skriftlig tillatelse. [. . . ]